NPV ARROW MATE CEMENT, FEATHER GLUE
A superb adhesive for bonding vanes, feathers, or nocks to aluminum, carbon wood, and glass shafts. Only the best glue for gluing your feathers to your shafts.✓Instant glue designed for vanes, feathers, and nocks on all shaft types✓Clamp time 30 seconds, cure time 2 hours✓Medium viscosity✓1 FL. ...
BOHNING FLETCHING TAPE
€10,95
BOHNING FLETCHING TAPE
Well known sticky tape to fix your fletchings with. Will do, depending on the length of the fletchings, 3-4 dozen arrows. ✓Designed for Mylar vanes & feathers ✓Works on all shaft surfaces ✓Length - 720" ✓Width - 0.1875" ✓Machine cut without lubricant so no dead zones in the roll ✓One roll fl...
BOHNING CREST-LAC 1OZ JAR/30 ML, CRESTING PAINT
Bohning's water-based Crest-Lac paints produce a glossy, durable finish. We formulated them specifically for cresting and dipping arrows, with optimal flow and leveling so brush marks don't show when dry, and non-bleeding properties that achieve crisp edges on even the finest cresting stripes. Bo...
TEMPLATE SET, WARBOW SOCIETY SHAPES, 5 TEMPLATES IN WOODEN BOX
Template set, English and Dutch Warbow Society shapes, 5 templates These templates are used after the full feathers have been glued to the shaft. Some painters tape and a scalple will help you on the project. contains : Wooden box (flatpack) Standard arrow shape Livery arrow shape shape Crecy ...
SPARE BLADE FOR ROTARY CUTTER, ROUND ROLING BLADE
If eventually, your rotary cutter goes dull this is the spare blade to go with it.Nothing is worse than wanting to start cutting fletchings and finding your tools are blunt. Fits Fairbows Rotary cutter 45 mm Long-lasting Super sharp
ALUMINUM TAPERTOOL FOR WOODIES 5/16 OR 11/32 BY BUCKTRAIL
Aluminum Taper toolLike and old fashioned pencil sharpener but better and in the correct tapering/angle for your wooden arrows.✓Works for 5/16 or 11/32 ✓Replaceable knives✓Tapering for nocks and arrowheads✓With aluminum collectors
UHU PLUS ENDFEST 300 2 TUBES 33 GRAM
Set of two 15 ml tubes of 2 K epoxy glue. super strong 2 K epoxy, Please mix 1:1 ratio 90 muinutes open time.solid after 6 hrs at room temperature.Fully hardened at roomtemperature after 24 hours
BOHNING FLETCH FUSE SUPERGLUE/INSTANT GLUE
Fletch Fuse is Bohning's budget-friendly instant glue designed for vanes, points, inserts, outserts, & swedged nocks. It works on all shaft types - carbon, aluminum, fiberglass, wood, and wrapped or crested arrows. Fletch Fuse adhesive is slightly thicker and contains more additives than Blaz...
HORN NOCK WITH HORN TANG
€12,04
HORN NOCK WITH HORN TANG
Horn arrow nock with horn tang. These are an ideal choice for making your own authentic-looking arrows. The horn is buffalo horn and comes in different shades of black, A slot has been made (2 mm wide) to help you with centering a slot for your bowstring. With these, you can make your own design...
BUCK TRAIL HIGH GRADE TAPERTOOL FOR WOODIES 5/16 AND 11/32
Aluminum Taper toolLike and old fashioned pencil sharpener but better and in the correct tapering/angle for your wooden arrows. Works for 5/16 and 11/32 wooden shafts Replaceable knives Tapering for nocks and arrowheads
ALUMINUM TOOL BEARPAW ARROWHEAD PULLER
This Aluminum tool helps you to retrieve stuck arrowheads from targets (and trees). Unscrew the shaft from the arrowhead and screw in this mighty tool and simply pull the tapered (taper fit) arrowhead out. This works well for tapered arrowheads, of 9-32, 5/16, 11/32, and 23/64 arrowheads.✓ Alumin...
UHU PLUS SOFORTFEST 2 TUBES 33 GRAM
Set of two 15 ml tubes of 2 K epoxy glue. Strong 2 K epoxy, Please mix 1:1 ratio 2 muinutes open time.solid after 5 minutes at room temperature. Reaching 8N/mm2
ALUMINUM TAPERTOOL FOR WOODIES 5/16 AND 11/32 AND 23/64
Aluminum Taper toolLike and old fashioned pencil sharpener but better and in the correct tapering/angle for your wooden arrows. Works for 5/16 and 11/32 and 23/64 wooden shafts Replaceable knives Tapering for nocks and arrowheads
UHU PLUS SCHNELLFEST 2 TUBES 35 GRAM
Suitable for fast, strong, and invisible repair of many materials, such as pottery, porcelain, glass, leather, wood, stone, metal, ceramics. Both with themselves and in combination. Set of two 15 ml tubes of 2 K epoxy glue. Strong 2 K epoxy, Please mix 1:1 ratio5 minutes open time. solid after ...
GAS PRO HIGH GRADE TAPERTOOL FOR WOODIES 5/16 AND 11/32
Aluminum Taper toolLike and old fashioned pencil sharpener but better and in the correct tapering/angle for your wooden arrows. Works for 5/16 and 11/32 wooden shafts Replaceable knives Tapering for nocks and arrowheads
BOHNING FLETCHING JIG
Bohning Fletching Jig Pro Class Right Wing (helical) Adjusts to accomodate all shaft sizes Set your own degree of offset apable of fletching 3 vanes at 120° apart OR 4 vanes at 90° apart Fletch vanes or feathers up to 5.5”