Bow kits

KIT: Mayar Horsebow parts kit.All the Bamboo parts, including the siya's, make this KIT.So what can you make? Using the siya's and riser included , using this glue-up form : https://fairbow.myshopify.com/collections/bow-tools-diy-kits-manual/products/horsebow-glue-up-moldYou could make a bow simi...

Simplified Improved Reflex Deflex Stave Raw Parts kit with the Form and other parts needed for gluing. (not including the glue etc.)Made simpler with better performance.Approximately 1 3/4" wide X 72" longThe raw parts kit for the reflex deflex performance stave includes the tapered Greenheart co...

Ready to glue stave has 2 pieces. A piece of clear sapwood hickory (best Hickory for bow making) AND a planed bamboo heat tempered backing strip.Both are approximately 1 1/2" wide and 76 inches long.Hickory is the most forgiving wood for beginnersReady to glue Hickory and Bamboo kit.(Bamboo is pl...

80" Heavyweight Tri-Lam English Longbow Raw Parts KitMake a performing beauty from this kit:Parts can yield bows up to 150 pounds (and below)1 3/8" - 1 1/2" wide and thick to produce heavy numbers. Use the English longbow instructionals to build this bow except make it a Heavy weight bow. Or use ...

KIT: Assyrian Horsebow parts kit.All the Bamboo parts, including the siyahs make this KIT.✓ 2 ash or Hickory Siyahs or ears. Pre-shaped and ready to be glued on a stave✓ 1 Supercore bamboo core✓ 1 bamboo backing flattened and sanded✓ 1 bamboo belly  flattened and sanded✓ Core, backing, and belly ...

KIT: Scythian Horsebow parts kit.All the Bamboo parts, including the siya's make this KIT.This Kit contains: Instructional e-booklet with general guidelines for bowmaking 2 ears or siyas in a white wood (Hickory/Ash) Sanded 52 inch bamboo backing Sanded 52 inch bamboo belly Sanded Supercore core...

Reflex Deflex Stave Raw Parts kit with the Form and other parts needed for gluing.Made for better performance!Approximately 1 3/4" wide X 72" longThe raw parts kit for the reflex deflex performance stave includes the tapered hickory belly core, Planed bamboo backing strip, and the handle riser bl...

KIT: Mayar Horsebow parts kit.The Riser and the Siyahs make this KIT.Using this glue-up form: https://fairbow.myshopify.com/collections/bow-tools-diy-kits-manual/products/horsebow-glue-up-moldYou could make a bow similar to our Magyar. Using wedges instead of Siya's you could make Kurgan, or shor...

Simplified Reflex Deflex form only. This kit is for you if you already have the parts for the bow and need only the form.Form kit includes the form itself, 2 anti splitting strips and 2 half rounded forms for creating the reflexed limbs.For 68" to 72 inch bowThe following picture shows the form a...

Tri-Lam English Longbow Raw Parts KitKit is 76" long, 1 1/4" wide and includes bamboo backing strip Or hickory backing strip, Tapered Greenheart center core, Pre tapered Sapwood hickory belly core, and strike plateGreenheart ads more performance!!!The belly core and center core are both pre-taper...

This Longbow kit has everything you need to start and finish a good shooting Longbow.Included:Tillering stickTillering stringFloor tillered Hickory or Maple stave (depending on availability)Linnen backing stripBow stringInstructionalThe only thing you need to do is the fine-tuning, finish tilleri...

This Longbow kit has everything you need to start and finish a good shooting Youth American Longbow.Smaller and more easy to handle than our adult size kit.65" tip to tip. Most of these kits tiller down to between 20 and 30 pounds.Included:tillering stringfloor tillered hickory stavelinen backing...

This Longbow kit has everything you need to start and finish a good shooting Longbow.Included:Tillering stringFloor tillered hickory staveLinnen backing stripBow stringInstructionalThe only thing you need to do is the fine tuning, finish tillering and drop the draw weight to what you need. The be...

ALL BAMBOO PARTS KITThe all bamboo parts kit goes perfect with our All Bamboo Bow Instructional Book.The parts kit includes all the materials for you to build an all bamboo performance bowThis includes all the parts that are mentioned in the BUILDING THE SOLID ALL BAMBOO BOW MADE EASY BOOKLET ins...

The glued but not floor tillered Ash belly with Hickory backing 76 inch Stave is simply a clear white Ash core with the Hickory backing already glued onto the stave for you. It is straight and measures about 1 to 1 1/2" wide by 76" long and a full 1" thick plus the thickness of the Hickory. ...

KIT: Maciejowski Horsebow parts kit.All the Bamboo parts, including the siya's make this KIT.Please order glue etc seperate.