Arrow Tools

Feather cutting template. You will need a rotary knife and a smooth surface (cutting mat) to work with.Remember to cut towards the beginning of the feather! Over 80 different shapes available, medieval template, eastern template Easy to use The clear Perspex allows you to see your workpiece Both...

Feather cutting template You will need a rotary knife and a smooth surface (cutting mat) to work with.Remember to cut towards the beginning of the feather!✓Over 90 different shapes are available✓Easy to use✓The clear Perspex allows you to see your workpiece✓Both Left and Right-wing available✓Can ...

A must-have for hobby and professional fletchers alike. (we also use it to cut leather etc).careful, the blade is super sharp, scalpel-like, and will not stop for your fingers.Works extremely well on a flat and proper cutting surface with our feather cutting templates. (colors may vary)Spare blad...

Tophat thread cutter to go with Tophat screw-on arrowheads and adapters Stainless steel available for 5/16, 11/32, and 23/64 wooden shafts

Rotary Mat, cutting surface,  45 x 30 cm (a3)   Perfect surface protection for use with a rotary cutter and our perspex feather templates.

Only the best glue for gluing your feathers to your shafts.✓Instant glue designed for vanes, points, inserts, swedged nocks, outserts & bushings✓Works on all shaft types✓Clamp time 30 seconds, cure time 2 hours✓Medium viscosity✓3/4 oz

Plastic Taper toolLike and old fashioned pencil sharpener but better and in the correct tapering/angle for your wooden arrows. Works for 5/16 or 11/32 or 23/64 wooden shafts Replaceable knives Tapering for nocks and arrowheads

Feather cutting template You will need a rotary knife and a smooth surface (cutting mat) to work with.Remember to cut towards the beginning of the feather!✓ Over 90 different shapes are available✓ Easy to use✓ The clear Perspex allows you to see your workpiece✓ Both Left and Right-wing available✓...

center drill tool by Arrow Doctor With this tool and an electric drill, you can make a nice centered hole for the tang of an Arrow Doctor Manchu nock.The hole made is approx. 4 mm wide.✓ Made from anodized aluminum✓ Replaceable drill✓ Made for 5/16 OR 11/32 shafts OR 23/64 wooden or Bamboo shafts

FAIRBOW SUPER CLINGY 2.0No spitting here, not even a dragon could get loose after being glued with this industrial quality super glue. There is 50 gram in a bottle, real bargain.Superglue nice and thick.Medium viscosity (not gel, not water).

This rasp is ideal for the home bowyer and professional bowyer alike. A handy tool. Four different rasps and files build into one well ergonomically designed tool. Cicely rounded corners and easy to hold.Every working surface is approximately 1 x 4 inches.4 in one:Less space in your toolbox, less...

By now a famous Jig used all over the world.Not an original, but a classic in its own right, and very affordable.We have been using these for 15 years. All they need is the occasional bit of lubricant.Tip:Before using the Jig, put some vaseline, string wax, or lubricant on the inside of the clamp...

These adapters allow you to use screw-in arrowheads (Saunders, broadheads, etc) on your wooden arrows.Use the thread cutter to cut the thread, and screw on the adapter with the assembly tool by Tophat. works like a dream.The adapters are made from high-grade aluminum and weigh 40-grain each

Template set, Far Eastern shapes, 8 templates contains :nrs 2, 3, 54, 60, 61, 62, 63 and 66. nr. 2, Manchu, 250 mm nr 3, japanese, 6 inch nr 54, Korean XL, 7.5 inch nr 60, Ottoman, 3.3 inch nr 61, Ottoman XL, 3.3 inch nr 62, Manchu Mini, 7.5 inch nr 63,  Ottoman Military, 7 inch nr 66,  Korean T...

Fish glue to glue the pieces of your bow together, the natural way. Packed in a plastic bag, containing 100 grams.