FILE 'N RASP, THE IDEAL 4WAY BOWYERS AND FLETCHERS RASP
This rasp is ideal for the home bowyer and professional bowyer alike. A handy tool. Four different rasps and files build into one well ergonomically designed tool. Cicely rounded corners and easy to hold.Every working surface is approximately 1 x 4 inches.4 in one:Less space in your toolbox, less...
CARTEL FLETCHING JIG HELICAL RW CLAMP ONLY
For the famous Jig, this is the helical clamp for right wing feathers. (just the clamp) Making your arrows spin more, getting a straighter shot (all be it slower), and making the arrow more forgiving. This item is the Right Wing Helical clamp to complement your Cartel Fletching Jig.This clamp hel...
CARTEL FLETCHING JIG
By now a famous Jig used all over the world.Not an original, but a classic in its own right, and very affordable.We have been using these for 15 years. All they need is the occasional bit of lubricant.Tip:Before using the Jig, put some vaseline, string wax, or lubricant on the inside of the clamp...
FEATHER AND NOCK GLUE UHU KRAFT 42 GRAM
Feather and Nock glue Uhu Kraft 42 gr.Uhu Kraft is the ideal glue to glue nocks and feathers on wooden arrows. The glue-ability is considerably higher than usual glues and also holds on to all kinds of varnishes. ✓ Content 42 gr. ✓ Ideal glue for nocks and feathers on wooden arrows (big tube)
SPARE BLADE FOR ROTARY CUTTER, ROUND ROLING BLADE
If eventually, your rotary cutter goes dull this is the spare blade to go with it.Nothing is worse than wanting to start cutting fletchings and finding your tools are blunt. Fits Fairbows Rotary cutter 45 mm Long-lasting Super sharp
NPV ARROW MATE CEMENT, FEATHER GLUE
A superb adhesive for bonding vanes, feathers, or nocks to aluminum, carbon wood, and glass shafts. Only the best glue for gluing your feathers to your shafts.✓Instant glue designed for vanes, feathers, and nocks on all shaft types✓Clamp time 30 seconds, cure time 2 hours✓Medium viscosity✓1 FL. ...
RATTAN FILL STICKS FOR BAMBOO SHAFTS
Rattan filling sticks for making the hollow Bamboo shafts solid at the ends.Apply these with sufficient superglue or 2k epoxy and you can finish the shafts like you are used to, the same way as solid wooden shafts.Supplied per 24 pieces, 6 cm long (approx. 2 inch)
HIDE GLUE BAGGED 100 GRAMS 300 BLOOM
Hide glue to glue the pieces of your bow together, the natural way. Packed in a plastic bag, containing 100 grams. Works very well when mixed 80/20 with our bone glue.
EMT (Easy Measurement Tool) in clear Perspex or MDF based wood
Fairbow EMT (easy measurement tool) in Clear Perspex or MDF based wood. All the sizes for arrows we use, along with feather length indicated in inches, feather hight and length for EWBS and DWS arrows.A must have for every fletcher.
BOHNING FLETCHING TAPE
Well known sticky tape to fix your fletchings with. Will do, depending on the length of the fletchings, 3-4 dozen arrows. ✓Designed for Mylar vanes & feathers ✓Works on all shaft surfaces ✓Length - 720" ✓Width - 0.1875" ✓Machine cut without lubricant so no dead zones in the roll ✓One roll fl...
ARROW PULLER GRIP 'GRASPER' BLACK
Rubber grip with belt hook loop. The Grasper by AvalonThis grip helps you with gripping arrow shafts while applying screw-on arrowheads and pulling arrows out of tough targets.✓Soft molded handgrips✓Belt hook loop✓Deep wedge for strong support
LEG SINEW STRIPS APPROX. 6-9 INCHES
Dried unprocessed leg sinew.For backing self bows and tying fletching or points to arrows. Sold per piece. Average length 6-9 inches. Not processed, just dried
UHU PLUS ENDFEST 300 2 TUBES 33 GRAM
Set of two 15 ml tubes of 2 K epoxy glue. super strong 2 K epoxy, Please mix 1:1 ratio 90 muinutes open time.solid after 6 hrs at room temperature.Fully hardened at roomtemperature after 24 hours
ALUMINUM TAPERTOOL FOR WOODIES 5/16 OR 11/32 BY BUCKTRAIL
Aluminum Taper toolLike and old fashioned pencil sharpener but better and in the correct tapering/angle for your wooden arrows.✓Works for 5/16 or 11/32 ✓Replaceable knives✓Tapering for nocks and arrowheads✓With aluminum collectors
TOPHAT ASSEMBLY TOOL
Die-cast zinc and steel assembly tool for Tophat products and especially to help you with any screw on arrow head
HAND DRILL FOR BAMBOO SHAFTS
Very nice and handy hand drill for drilling out the Bamboo shafts.Works like a dream!Ready to ship.





















