Bow Parts

Hard Maple core / veneer 2.0 x 45 x 2050 mm. (bot: Acer Saccharum)

Leather (nubuck) strip with a self-adhesive backing.The strip is approx 80 cm long (usually with a connecting seam in the strip).These strips are long enough for a riser grip.We use these on the Sherwood bows, but are very good for any other bow grip.Approx 3 cm wide, and 80 cm long (31 inch)

Purplehart wood, (Bot: Peltogyne Venosa)Approx.  25 x 40 x 2050 mm

Barrel Tapered Heat tempered planed bamboo Barrel tapered bamboo backing means that the bamboo is thicker in the center and tapers to a thinner dimension toward the tips of the bamboo. This can be advantageous to the bow builder if he is wanting everything to be pre tapered in thickness before gl...

Hard Maple core appr 25 x 40 x 2050 mm(bot: Acer Saccharum)

Drilled cow horn tips for making Longbow nocks.We have drilled these pieces conic- 12 mm x 40 mm so you can fit them directly on to your bow!Sold per pair!

Smooth and ready for gluing. Measures approximately 1 1/2" wide, and a full 78" long!For best results and maximum strength use a toothing plane or a hacksaw blade on the side to be glued for extra strength. This will give the glue something to grab instead of a smooth surface that will soak in th...

Barrell tapered Hickory backing strips are tapered in thickness from the middle to the tips. Rough size is 3/16-1/4" thick in the middle and roughly 1/8" at the tips. Thicknesses may vary slightly from piece to piece. Smooth and ready for glueing . Measures approximatly 1 1/2"" wide , and a full ...

Kobu (Bot: Intsia Bijuga ea) belly wood. Cut to approx. 25 x 40 x 2050 mm.

Our Pre tapered Ipe core wood is simple. Clean no knots. Width is about 1 1/4" wide, length is approx 78" unless you need it cut shorter. These core pieces are for bows that will be receiving a backing and a bellie.The grain will not allow them to be used without a backing.These are excellent bel...

Padouk wood belly core 25 x 40 x 2050 mm (approx)(bot: Pterocarpus Soyauxii)

Horn block (s) / scale. It is ideal for cutting horn slivers for inserts, knife handles, tip overlays etc etc. Good solid quality, in black. These will be very nice when polished. ✓ Buffalo horn✓ Approx. 125 x 50 x 11 mm✓ Sold per Piece