Economical way to give your next bow some insurance and durability as well as an attractive appeal.
Full 80" length and over 2" wide.
Put a PURE linen backing on your bow with Titebond 2 easily.
(Goes without saying Bowgrip 100, OR Fairglue 2010 can be used for excellent results as well!)
Adds a lot of durability by not allowing the fibers to rise on the back of your bow, preventing disaster.
Goes excellent with our Floor tillered hickory board staves!!
PURE linen backing strip. 100% pure ecru linen.
Course weave 2"X 80" VERY strong!
1 Cover and protect belly with masking tape
2 Mix bowgrip glue well and measure correct
3 Apply glue to backing side. Try to get an even spread rather thick
4 Apply glue
5 Drape the backing into the glue
6 Drape backing on the glue
7 Gently tap the backing into the glue using a clean disposable brush
8 Gently push backing into the glue with the brush so it saturates
9 Push the backing into the glue gently
10 Always make sure you have more to do with one glue mix
11 2 bows different backings
12 Cut of the not used ends
13 Saturation is clearly visible
14 Clamp the bow onto a straight piece of wood in the center
15 One can do 2 at once
17 Cut off excess with a sharp blade and remove the masking tape