Tanged glue in Manchu or Qing nock shape, made from beech. Sold in a pack of 6.
To ensure a secure fit, we suggest you use waterproof wood glue (we find Titebond III Ultimate works best).
Available to fit 11/32" diameter wood shafts.
Tested to 70lb draw weight.
Just drill in the nock socket at the nock end of the shaft as normal, apply a blob of glue inside the cone, gently push and twist the nock into the shaft, twist it 360 degrees to make sure the glue covers all surfaces of the shaft and the inside of the cone, line up with the appropriate grain direction of your shaft, wipe off excess glue, and set aside to dry as per your glue instructions.
To ensure a good fit with your bow string, a little light sandpaper work to fine-tune the "click" may be necessary.
Can be stained, dyed, painted, sealed, waxed, varnished etc to match your chosen colour schemes.
Made from A-grade Beech
Nock length excluding the tang approx 50 mm (2 inch)