Bow Parts

FAIRGLUE-2010 120 ml kit includes (enough for 2 bows or 2 glue-up joints i.g. trilam) 60 ml Part A resin and 60 ml, part B hardener Specially formulated 2 part glue for laminating bamboo, various woods, linen, silk, and other natural materials as well as fiberglass with the strength you need. 1...

Supercore bamboo core strip for laminated bows. Heat treated and evenly tempered. Add Heat treated Supercore bamboo core between the backing and the main belly core and expect some serious results. We now heat treat and Temper our Supercore bamboo core for better speed and durability. As a result...

Heat tempered planed bamboo. All of our planed bamboo backing strips are heat tempered by cooking them in a convection environment. This allows the bamboo to be evenly tempered throughout the full length and full width of the bamboo. This ensures maximum performance and minimum shrinking. Most ar...

THIS IS ONE HOT BACKINGApply to wood, bamboo or glass bows as well as sinew backed bows!Unlike real snakeskins this backing add tons of strength and insurance to your bow AND it only costs a fraction of what real snakeskins cost!!  Plus these are much easier to apply.Use with bowgrip or any other...

1,85 m Bearpaw Stabil Kore 0,4 X 50 mm (2" X 0,015") The alternative to carbon brings a considerable increase in efficiency and precision. The performance-enhancing fabric reinforces the limb and in so doing saves material and increases the throwing result considerably. By its cross-woven structu...

Smooth and ready for gluing. Measures approximately 1 1/2" wide, and a full 80" long!For best results and maximum strength use a toothing plane or a hacksaw blade on the side to be glued for extra strength. This will give the glue something to grab instead of a smooth surface that will soak in th...

Fish glue to glue the pieces of your bow together, the natural way. Packed in a plastic bag, containing 100 grams.

Rawhide backingstrip Approx 50 inch long Approx 2 inch wide Approx 1 mm thick

Set of pre shaped polished black horn nocks. Contains one bottom- and one top nock.These are oversized, leaving you enough material to play with and customize. .

Fairbow  UL Glass is a continuous fiberglass laminate. After having problems with the variations in quality from different suppliers we have decided to have our own glass produced.We have started using this glass in the Bowman bows and will slowly incorporate it in our other glass bows.✓ Our glas...

Supercore bamboo core for laminated bows. Heat treated and evenly tempered. Add Heat treated Supercore bamboo core between the backing and the main belly core and expect some serious results. We now heat treat and Temper our supercore bamboo core for better speed and durability. As a result of he...

Hide glue to glue the pieces of your bow together, the natural way. Packed in a plastic bag, containing 100 grams. Works very well when mixed 20/80 with our fish glue.

Our  Ipe core wood is simple. Clean No Knots. Width is about 1 1/4 wide, length is approx 78" unless you need it cut shorter. These core pieces are for bows that will be receiving a backing and a bellie.The grain will not allow them to be used without a backing.These are excellent belly cores but...

Hard Maple core / veneer 2.0 x 45 x 2050 mm. (bot: Acer Saccharum)

Drilled horn tips for making Longbow nocks.We have drilled these pieces conic- 12 mm x 40 mm so you can fit them directly on to your bow!Sold per pair!Color and sizes may vary.These are semi-rough parts and it is difficult to guesstimate the end color.

Dried processed Watusi backstrap sinew.For backing self bows and tying fletchings or points to arrows.✓ Sold per 50 gram (approx. 2 ounces).✓ Average length 25 inches.✓ Processed, and air dried