UHU PLUS ENDFEST 300 2 TUBES 33 GRAM
Set of two 15 ml tubes of 2 K epoxy glue. super strong 2 K epoxy, Please mix 1:1 ratio 90 muinutes open time.solid after 6 hrs at room temperature.Fully hardened at roomtemperature after 24 hours
BONE SCALES (WATUSI)
Bone scales for knife making and DIY projects.✓ Watusi bone scale✓ Sold per piece✓ approx. 145 x 40 x 5 mm
GRIP LEATHER STRIP 80 CM SELF ADHESIVE
Leather (nubuck) strip with a self-adhesive backing.The strip is approx 80 cm long (usually with a connecting seam in the strip).These strips are long enough for a riser grip.We use these on the Sherwood bows, but are very good for any other bow grip.Approx 3 cm wide, and 80 cm long (31 inch)
HARD MAPLE CORE/VENEER 2.0 X 45 X 2050 MM
Hard Maple core / veneer 2.0 x 45 x 2050 mm. (bot: Acer Saccharum)
PURPLEHEART BELLY WOOD 25 X 40 X 2050 MM
Purplehart wood, (Bot: Peltogyne Venosa)Approx. 25 x 40 x 2050 mm
BARREL TAPERED PLANED BAMBOO BACKING STRIPS, HEAT TEMPERED
Barrel Tapered Heat tempered planed bamboo Barrel tapered bamboo backing means that the bamboo is thicker in the center and tapers to a thinner dimension toward the tips of the bamboo. This can be advantageous to the bow builder if he is wanting everything to be pre tapered in thickness before gl...
HARD MAPLE BELLY CORE 25 X 40 X 2050 MM
Hard Maple core appr 25 x 40 x 2050 mm(bot: Acer Saccharum)
MASSARANDUBA (BOLLETRIE) BELLY WOOD 25 X 40 X 2050 MM
Massaranduba (Bolletrie) belly wood 25 x 40 x 2050 mm. (approx)(bot: Manilkara Bidentata.)
ASH BACKING STRIP PARALLEL 78 x 1 3/4 x 1/4 INCH
Smooth and ready for gluing. Measures approximately 1 1/2" wide, and a full 78" long!For best results and maximum strength use a toothing plane or a hacksaw blade on the side to be glued for extra strength. This will give the glue something to grab instead of a smooth surface that will soak in th...
BARRELL TAPERED HICKORY BACKING STRIP
Barrell tapered Hickory backing strips are tapered in thickness from the middle to the tips. Rough size is 3/16-1/4" thick in the middle and roughly 1/8" at the tips. Thicknesses may vary slightly from piece to piece. Smooth and ready for glueing . Measures approximatly 1 1/2"" wide , and a full ...
DRILLED HOORN TIPS COW HORN
Drilled cow horn tips for making Longbow nocks.We have drilled these pieces conic- 12 mm x 40 mm so you can fit them directly on to your bow!Sold per pair!
HORSEBOW GLUE UP MOLD
This kit consists of 3 layers of MDF board precision-cut inhouse with our CNC router, and 15 wooden dowels.You will need to do some assembly, glue the boards together to create an almost 2-inch wide mold. This mold is exactly the same dimensions as those we use to make our Katsa, Kurgan and Magya...
KOBU BELLY WOOD 25 X 40 X 2050 MM
Kobu (Bot: Intsia Bijuga ea) belly wood. Cut to approx. 25 x 40 x 2050 mm.
5 MM THICK 5 X 5 INCH CORK SHEET FOR GRIPS
5 mm thick 5 x 5 inch cork sheet for grips. Glue it to your bow with some double sided adhesive tape and it gives a comfortable grip. Cover it with leather for durability
PADOUK WOOD BELLY CORE 25 X 40 X 2050 MM
Padouk wood belly core 25 x 40 x 2050 mm (approx)(bot: Pterocarpus Soyauxii)
PRE TAPERED BOW MAKING CORES GREENHEART
Our Pre tapered Ipe core wood is simple. Clean no knots. Width is about 1 1/4" wide, length is approx 78" unless you need it cut shorter. These core pieces are for bows that will be receiving a backing and a bellie.The grain will not allow them to be used without a backing.These are excellent bel...