FIELDPOINT, BLACK, ROUNDED SHAPE, WITH SCREW THREAD PARALLEL
Fieldpoint for your woodies (wooden arrows)āĀ Screw-on (we do advise the use of glue)āĀ Parallel insideāĀ Sold per piece
FIELDPOINT, BLACK, ROUNDED SHAPE, PARALLEL 3/8 160 GRAIN
Fieldpoint for your 3/8 woodies (wooden arrows)ā Parallel insideā Sold per pieceā For 3/8 shaftsā 160 grain
TOP HAT THREAD CUTTER
Tophat thread cutter to go with Tophat screw-on arrowheads and adapters Stainless steel available for 5/16, 11/32, and 23/64 wooden shafts
TOPHAT LONG REPAIR ARROWHEAD PER DOZEN
When one of my arrows break it is usually right behind the arrowhead. thus shortening the shaft.These arrowheads lengthen the shaft by approx. 1 inch, without adding unwanted weight.Made from high-grade aluminum.ā Available in 5/16 and 11/32 diameter for wooden shaftsā Available in 70 (80 for 11/...
TOPHAT BULLET ARROWHEAD PER DOZEN
Bullet-shaped arrowheads. Parallel fitting with screw-on thread.Made from high-grade brass.āĀ available in 5/16 and 11/32 diameter for wooden shaftsāĀ available in 70 (80 for 11/32)-125 graināĀ requires thread cut with TOPHAT thread cutter toolāĀ Sold per dozen Installation: The arrow point has t...
TOPHAT 3D VA ARROWHEAD PER DOZEN
3D Apex-shaped arrowheads. Parallel fitting with screw-on thread.Made from high-grade Stainless steel. available in 5/16 and 11/32 diameter for wooden shafts available in 70 (80 for 11/32)-125 grain requires thread cut with TOPHAT thread cutter tool Sold per dozen Installation: The arrow p...
TOPHAT PARALLEL SCREW-ON ADAPTER
These adapters allow you to use screw-in arrowheads (Saunders, broadheads, etc) on your wooden arrows.Use the thread cutter to cut the thread, and screw on the adapter with the assembly tool by Tophat.Ā works like a dream.The adapters are made from high-grade aluminum and weigh 40-grain each
TOPHAT WHISTLER ARROWHEAD SCREW ON 100 GRAIN
Whistling arrowhead.Screw-onĀ 100 grain Aluminum Can be screwed open to clean dirt out Sold per pieceEnd of line product
TOPHAT CHARLY ARROWHEAD SCREW IN 100 GRAIN
Stump shooting arrowheads.Screw-in combo thread.Ā 120 grain Stainless steel Fangarms can be replaced Approx. 5/16 diameter. Sold per 3 pieces
GUMMI BLUNT STANDARD COMBO THREAD 125 GRAIN
Gummi Blunt, very good for rooving out in the field, or catching small game. High-Quality EPDM rubber Standard Combo / Saunders thread 125 Grain Sold per 3 pieces
ELEVEN FOAM TARGET 3 X 24 X 24 INCHES
Lightweight good quality foam target. This type of target is not sensitive to rotting, so leaving it outside in de rain is not a problem.(Foam feet can be ordered separately)These are supplied with one target face and 4 target pins. Layered foam target 7 x 60 x 60 CM (3X24X24 INCHES) Stops most...
HICKORY BACKING STRIP PARALLEL 80 x 1 3/4 x 1/4 INCH
Smooth and ready for gluing. Measures approximately 1 1/2" wide, and a full 80" long!For best results and maximum strength use a toothing plane or a hacksaw blade on the side to be glued for extra strength. This will give the glue something to grab instead of a smooth surface that will soak in th...
HAITHABU BRONZE ARROW NOCK
Bronze arrow nock after the find in the Viking town Haithabu in northern Germany. Made from Bronze 8 or11 mm at the top 9 mm high (without tang) 3.7 or 4.4 gram each Sold per Piece
SPALTED BIRDSEYE MAPLE VENEER
Our Birdseye Maple veneer strips are 72 inches long,Ā 5 cm wide (almost 2 inches) backed with fleece and ideal for your bow building projects.We recommend using a grit 100 sanding paper on a sanding block to remove the fleece just before gluing, but we know of bowyers who don't bother and leave t...
BROWN CURLY BIRCH VENEER 72 X 2 INCH 2 STRIPS
Our veneer strips are 72 inches long,Ā 5 cm wide (almost 2 inches) backed with fleece, and ideal for your bow building projects.We recommend using a grit 100 sanding paper on a sanding block to remove the fleece just before gluing, but we know of bowyers who don't bother and leave the fleece on.ā...
GREY CURLY BIRCH VENEER 72 X 2 INCH 2 STRIPS
Our veneer strips are 72 inches long,Ā 5 cm wide (almost 2 inches) backed with fleece and ideal for your bow building projects.We recommend using a grit 100 sanding paper on a sanding block to remove the fleece just before gluing, but we know of bowyers who don't bother and leave the fleece on.āT...


















