1,85 m Bearpaw Stabil Kore 0,4 X 50 mm (2" X 0,015") The alternative to carbon brings a considerable increase in efficiency and precision. The performance-enhancing fabric reinforces the limb and in so doing saves material and increases the throwing result considerably. By its cross-woven structu...

This Aluminum tool helps you to retrieve stuck arrowheads from targets (and trees). Unscrew the shaft from the arrowhead and screw in this mighty tool and simply pull the tapered (taper fit) arrowhead out. This works well for tapered arrowheads, of 9-32, 5/16, 11/32, and 23/64 arrowheads.✓ Alumin...

Amazaque wood belly core 25 x 40 x 2050 mm(bot: Guibourtia ehie)

Our veneer strips are 72 inches long,  5 cm wide (almost 2 inches) backed with fleece and ideal for your bow building projects.We recommend using a grit 100 sanding paper on a sanding block to remove the fleece just before gluing, but we know of bowyers who don't bother and leave the fleece on. ...

Smooth and ready for gluing. Measures approximately 1 1/2" wide, and a full 78" long!For best results and maximum strength use a toothing plane or a hacksaw blade on the side to be glued for extra strength. This will give the glue something to grab instead of a smooth surface that will soak in th...

Barrel Tapered Heat tempered planed bamboo Barrel tapered bamboo backing means that the bamboo is thicker in the center and tapers to a thinner dimension toward the tips of the bamboo. This can be advantageous to the bow builder if he is wanting everything to be pre tapered in thickness before gl...

Barrell tapered Hickory backing strips are tapered in thickness from the middle to the tips. Rough size is 3/16-1/4" thick in the middle and roughly 1/8" at the tips. Thicknesses may vary slightly from piece to piece. Smooth and ready for glueing . Measures approximatly 1 1/2"" wide , and a full ...

Our veneer strips are 72 inches long,  5 cm wide (almost 2 inches) backed with fleece, and ideal for your bow building projects.We recommend using a grit 100 sanding paper on a sanding block to remove the fleece just before gluing, but we know of bowyers who don't bother and leave the fleece on.✓...

birdseye Maple core / veneer 0.5 x 45 x 2050 mm(bot: Acer Saccharum)

Our veneer strips are 72 inches long,  5 cm wide (almost 2 inches) backed with fleece, and ideal for your bow building projects.We recommend using a grit 100 sanding paper on a sanding block to remove the fleece just before gluing, but we know of bowyers who don't bother and leave the fleece on.✓...

Our  Ipe core wood is simple. Clean No Knots. Width is about 1 1/4 wide, length is approx 78" unless you need it cut shorter. These core pieces are for bows that will be receiving a backing and a bellie.The grain will not allow them to be used without a backing.These are excellent belly cores but...