HIDE GLUE BAGGED 100 GRAMS 300 BLOOM
Hide glue to glue the pieces of your bow together, the natural way. Packed in a plastic bag, containing 100 grams. Works very well when mixed 80/20 with our bone glue.
NPV ARROW MATE CEMENT, FEATHER GLUE
A superb adhesive for bonding vanes, feathers, or nocks to aluminum, carbon wood, and glass shafts. Only the best glue for gluing your feathers to your shafts.✓Instant glue designed for vanes, feathers, and nocks on all shaft types✓Clamp time 30 seconds, cure time 2 hours✓Medium viscosity✓1 FL. ...
SET CABINET SCRAPER TOOLS (4)
Scraper blades are indispensable for smoothing wooden surfaces, removing marks left by planing and routing, cleaning glued joints and levelling uneven varnish coats. Sharpened properly and burnished with a fine hook, they are capable of removing the finest shavings and leaving a smoother and more...
BOHNING FLETCHING TAPE
Well known sticky tape to fix your fletchings with. Will do, depending on the length of the fletchings, 3-4 dozen arrows. ✓Designed for Mylar vanes & feathers ✓Works on all shaft surfaces ✓Length - 720" ✓Width - 0.1875" ✓Machine cut without lubricant so no dead zones in the roll ✓One roll fl...
TEMPLATE SET, WARBOW SOCIETY SHAPES, 5 TEMPLATES IN WOODEN BOX
Template set, English and Dutch Warbow Society shapes, 5 templates These templates are used after the full feathers have been glued to the shaft. Some painters tape and a scalple will help you on the project. contains : ✓ Standard arrow shape✓ Livery arrow shape shape✓ Crecy / Poitiers arrow shap...
SPARE BLADE FOR ROTARY CUTTER, ROUND ROLING BLADE
If eventually, your rotary cutter goes dull this is the spare blade to go with it.Nothing is worse than wanting to start cutting fletchings and finding your tools are blunt. Fits Fairbows Rotary cutter 45 mm Long-lasting Super sharp
RATTAN FILL STICKS FOR BAMBOO SHAFTS
Rattan filling sticks for making the hollow Bamboo shafts solid at the ends.Apply these with sufficient superglue or 2k epoxy and you can finish the shafts like you are used to, the same way as solid wooden shafts.Supplied per 24 pieces, 6 cm long (approx. 2 inch)
ALUMINUM TAPERTOOL FOR WOODIES 5/16 OR 11/32 BY BUCKTRAIL
Aluminum Taper toolLike and old fashioned pencil sharpener but better and in the correct tapering/angle for your wooden arrows.✓Works for 5/16 or 11/32 ✓Replaceable knives✓Tapering for nocks and arrowheads✓With aluminum collectors
CABINET SCRAPER TOOL
Scraper blades are indispensable for smoothing wooden surfaces, removing marks left by planing and routing, cleaning glued joints and leveling uneven varnish coats. Sharpened properly and burnished with a fine hook, they are capable of removing the finest shavings and leaving a smoother and more ...
UHU PLUS ENDFEST 300 2 TUBES 33 GRAM
Set of two 15 ml tubes of 2 K epoxy glue. super strong 2 K epoxy, Please mix 1:1 ratio 90 muinutes open time.solid after 6 hrs at room temperature.Fully hardened at roomtemperature after 24 hours
TEMPLATE SET, ENGLISH AND DUTCH WARBOW SOCIETY SHAPES, 5 TEMPLATES
Template set, English and Dutch Warbow Society shapes, 5 templates contains :nrs 35, 36, 37, 41 and 42. nr. 35, Standard arrow 6 inch nr. 36, Quarter pound arrow, 7.5 inch nr. 37, Livery Arrow, 7 3/8 inch nr. 41, New Amsterdam Arrow, 6 inch nr. 42, Crecy / Poitiers arrow, 7 3/8 inch Please sele...
HORN NOCK WITH HORN TANG
Horn arrow nock with horn tang. These are an ideal choice for making your own authentic-looking arrows. The horn is buffalo horn and comes in different shades of black, A slot has been made (2 mm wide) to help you with centering a slot for your bowstring. With these, you can make your own design...
HORN DOWELS 10 MM X 100 MM
Horn dowel 10 mm x 100 mm.These are often used for the horn ends on arrows.Just a bit larger than 3/8 to give you some room for sanding.
TEMPLATE SET, PARABOLIC SHAPES, 9 TEMPLATES
Full set of Parabolic templates. contains :nrs 14,15 16,17,18,19, 20, 21 and 39. nr. 14, 3 inch nr 15, 4 inch (will be sent later) nr 16, 5 inch nr 17, 6 inch nr 18, 3 inch superfast nr 19, 4 inch superfast nr 20, 5 inch superfast nr 21, 6 inch superfast nr 38, 1 inch please select left ...
TEMPLATE SET, BANANA SHAPES, 5 TEMPLATES
Template set, Banana shapes, 5 templates contains :nrs 4, 5, 6, 7 and 8. nr. 4, 2 inch nr. 5, 3 inch nr. 6, 4 inch nr. 7, 5 inch nr. 8, 6.5 inch
ALUMINUM TOOL BEARPAW ARROWHEAD PULLER
This Aluminum tool helps you to retrieve stuck arrowheads from targets (and trees). Unscrew the shaft from the arrowhead and screw in this mighty tool and simply pull the tapered (taper fit) arrowhead out. This works well for tapered arrowheads, of 9-32, 5/16, 11/32, and 23/64 arrowheads.✓ Alumin...