BOHNING FLETCH FUSE SUPERGLUE/INSTANT GLUE
Fletch Fuse is Bohning's budget-friendly instant glue designed for vanes, points, inserts, outserts, & swedged nocks. It works on all shaft types - carbon, aluminum, fiberglass, wood, and wrapped or crested arrows. Fletch Fuse adhesive is slightly thicker and contains more additives than Blaz...
TEMPLATE SET, ENGLISH AND DUTCH WARBOW SOCIETY SHAPES, 5 TEMPLATES
Template set, English and Dutch Warbow Society shapes, 5 templates contains :nrs 35, 36, 37, 41 and 42. nr. 35, Standard arrow 6 inch nr. 36, Quarter pound arrow, 7.5 inch nr. 37, Livery Arrow, 7 3/8 inch nr. 41, New Amsterdam Arrow, 6 inch nr. 42, Crecy / Poitiers arrow, 7 3/8 inch Please sele...
HORN NOCK WITH HORN TANG
€12,04
HORN NOCK WITH HORN TANG
Horn arrow nock with horn tang. These are an ideal choice for making your own authentic-looking arrows. The horn is buffalo horn and comes in different shades of black, A slot has been made (2 mm wide) to help you with centering a slot for your bowstring. With these, you can make your own design...
TEMPLATE SET, PARABOLIC SHAPES, 9 TEMPLATES
Full set of Parabolic templates. contains :nrs 14,15 16,17,18,19, 20, 21 and 39. nr. 14, 3 inch nr 15, 4 inch (will be sent later) nr 16, 5 inch nr 17, 6 inch nr 18, 3 inch superfast nr 19, 4 inch superfast nr 20, 5 inch superfast nr 21, 6 inch superfast nr 38, 1 inch please select left ...
HORN DOWELS 10 MM X 100 MM
Horn dowel 10 mm x 100 mm.These are often used for the horn ends on arrows.Just a bit larger than 3/8 to give you some room for sanding.
ACE ARCHERY TACKLE ROLL-R-STRAIGHT ARROW STRAIGHTENER
Roll straighten your wood shafts and finished arrows easily.Place warped side up on a flat surface or between supports. Roll straightener along the warped area of the shaft while applying downwards pressure.Check straightness and repeat the process with more pressure if necessary.Start with light...
TEMPLATE SET, BANANA SHAPES, 5 TEMPLATES
Template set, Banana shapes, 5 templates contains :nrs 4, 5, 6, 7 and 8. nr. 4, 2 inch nr. 5, 3 inch nr. 6, 4 inch nr. 7, 5 inch nr. 8, 6.5 inch
ALUMINUM TOOL BEARPAW ARROWHEAD PULLER
This Aluminum tool helps you to retrieve stuck arrowheads from targets (and trees). Unscrew the shaft from the arrowhead and screw in this mighty tool and simply pull the tapered (taper fit) arrowhead out. This works well for tapered arrowheads, of 9-32, 5/16, 11/32, and 23/64 arrowheads.✓ Alumin...
BUCK TRAIL HIGH GRADE TAPERTOOL FOR WOODIES 5/16 AND 11/32
Aluminum Taper toolLike and old fashioned pencil sharpener but better and in the correct tapering/angle for your wooden arrows. Works for 5/16 and 11/32 wooden shafts Replaceable knives Tapering for nocks and arrowheads
UHU PLUS SOFORTFEST 2 TUBES 33 GRAM
Set of two 15 ml tubes of 2 K epoxy glue. Strong 2 K epoxy, Please mix 1:1 ratio 2 muinutes open time.solid after 5 minutes at room temperature. Reaching 8N/mm2
UHU PLUS SCHNELLFEST 2 TUBES 35 GRAM
Suitable for fast, strong, and invisible repair of many materials, such as pottery, porcelain, glass, leather, wood, stone, metal, ceramics. Both with themselves and in combination. Set of two 15 ml tubes of 2 K epoxy glue. Strong 2 K epoxy, Please mix 1:1 ratio5 minutes open time. solid after ...
ALUMINUM TOOL FOR SELF NOCKING SHAFTS SELFNOCKER
This Aluminum selfnocker tool helps you to make slots for horn inserts. It has been designed for the self nock slot in your medieval or authentic arrow. With the spring steel collar system in aluminum, you can lock 5/16 to 23/64 diameter arrow shafts and cut these simply with an iron hacksaw or t...
GAS PRO HIGH GRADE TAPERTOOL FOR WOODIES 5/16 AND 11/32
Aluminum Taper toolLike and old fashioned pencil sharpener but better and in the correct tapering/angle for your wooden arrows. Works for 5/16 and 11/32 wooden shafts Replaceable knives Tapering for nocks and arrowheads
SET PERSPEX FEATHER CUTTING TEMPLATES 5 UNIQUE SHAPES
SET Perspex feather cutting templates 5 unique shapes for cutting after the feathers have been glued to the shafts Set contains five unique templates for feather cutting.EWBS DWS Standard arrow, EWBS DWS Livery arrow DWS Crecy and Poitiers arrow EWBS DWS Quarter pound arrow DWS NAP arrow
BOHNING FLETCHING JIG
€49,95
BOHNING FLETCHING JIG
Bohning Fletching Jig Pro Class Right Wing (helical) Adjusts to accomodate all shaft sizes Set your own degree of offset apable of fletching 3 vanes at 120° apart OR 4 vanes at 90° apart Fletch vanes or feathers up to 5.5”