FAIRBOW SCRAPER TOOL WITH WOODEN GRIP
The PERFECT tool for a floor tillered stave. You probably wont find a tool that gives you the smoothness and control this tool gives. Scrapes and planes away just the right amount of wood to give you the results your looking for without being too aggresive. Smoothes away the tooling marks and giv...
SET CABINET SCRAPER TOOLS (4)
Scraper blades are indispensable for smoothing wooden surfaces, removing marks left by planing and routing, cleaning glued joints and levelling uneven varnish coats. Sharpened properly and burnished with a fine hook, they are capable of removing the finest shavings and leaving a smoother and more...
NOCK PLYERS
€8,94
NOCK PLYERS
Plyers you can use to fasten brass rings on your bowstring. These plyers work very well. We use these a lot for fastening screw on arrowheads. Simply an Ideal all round tool
STAINLESS STEEL RULER, 24 INCH / 60 CM
Stainless steel ruler with both inches and centimeters. 24 inches or 60 centimeters. On the backside, it has a conversion table for imperial to metric. a very useful tool in bow and arrow making!
TRADITIONAL HAIR REST BY BEAR
Fairbows favorite traditional hair arrowrest set 2 pieces, one for against the bow, one for on the shelf.High quality, self-adhesive.This helps to protect your bow and makes it quieter.
CABINET SCRAPER TOOL
Scraper blades are indispensable for smoothing wooden surfaces, removing marks left by planing and routing, cleaning glued joints and leveling uneven varnish coats. Sharpened properly and burnished with a fine hook, they are capable of removing the finest shavings and leaving a smoother and more ...
SET OF DRAWING TEMPLATES IN PERSPEX ENGLISH LONGBOW LAYOUT
Set of 2 or 3 pieces laser-cut perfection in perspex.One piece is for laying out the side view aka belly tapering. 3/4 inch at the center to 1/2 at the tips.2 different pieces for your choice of bow layout. Either the parallel taper, 1.25 inch to 5/8 inch or the pyramid taper 1.25 inch to 5/8 inc...
SHRINK WRAP (ROLL) APPROX. 4 INCH WIDE
Shrinkwrap roll. Often used to wrap materials, in our unique work we use shrink wrap to wrap bowstaves during the glue-up. But we are sure you can find many other good uses of this stretch foil or stretch plastic during your bow-making projects. approx. 4 inches wide and 250 meters long, 20 mu th...
SANDING BLOCK WITH SANDING BELT
Sanding block with detachable sanding belt.This very handy tool helps you to control sanding of flat surfaches and do touch ups at horn nock making etc.Approx. 8 inches of worksurface both sides.
GLUE MIXING CUP
Mixing cup for glue with proper indications for quantity and mixture.fit for 350 ml.One use only but extremely easy!Ready to ship!
BRACING HEIGHT GAUGE / BOW HOOK / BOW SQUARE
This easy to use bracing height gauge simply clips on to bow string to set your nocking point and is easy to read as it has both imperial and metric scales on either side. Colour may vary.
GLOVES (FOR GLUEING)
Don't forget the gloves for glueing. The best we have found is surgical gloves . These are stronger and more tear resistant than typical rubber gloves that are used for glueing. They are also tighter fitting, giving you much more control.Price quoted is for three pairs.
GLUE MEASURING SYRINGES
Glue mixed properly you can achieve the strongest bond possible! An improper or Eyeballed mix can result in failure. Use our measuring syringes for exact and easy measurements, sure to give you the best results.Never miss mix a batch of glue again.With these, you can't go wrong, use them over and...
TAPERJIG 0,001 / 0,002 / 0,003 INCH
Taperjig to get the correct and required tapered laminations for your laminated (long-) bows.Our jigs are CNC cut in our own workshop. They can be either 80 or 40 inches long (to do 1 limb or two limbs at the same time) These are made from MDF and some simple assembling will be required. CNC pre...
KIT TRILAM REFLEX DEFLEX AND FORM IN RAW PARTS
Simplified Improved Reflex Deflex Stave Raw Parts kit with the Form and other parts needed for gluing. (not including the glue etc.)Made simpler with better performance.Approximately 1 3/4" wide X 72" longThe raw parts kit for the reflex deflex performance stave includes the tapered Greenheart co...
KIT: ASSYRIAN HORSEBOW PARTS ONLY (INCL. SIYA'S)
KIT: Assyrian Horsebow parts kit.All the Bamboo parts, including the siyahs make this KIT.✓ 2 ash or Hickory Siyahs or ears. Pre-shaped and ready to be glued on a stave✓ 1 Supercore bamboo core✓ 1 bamboo backing flattened and sanded✓ 1 bamboo belly flattened and sanded✓ Core, backing, and belly ...